JBF National cube, block, and bar magnets are crafted from the highest quality rare earth neodymium. These magnets are utilized across a wide spectrum of industries for a multitude of uses. To ensure longevity and maximum protection from corrosion, these magnets come triple coated with a base and top finish layer of nickel, with a layer of copper in between. Also, the countersunk Holes these magnets feature make affixing them in place as needed no issue at all.
Unit of Measure
Items
N42 to N52 Neodymium Block and Bar Magnets with Countersunk Holes

N42 Grade 0.5 Inch (in) Length Neodymium Magnet with Dual Sided Countersunk Holes

N42 to N52 Neodymium Block and Bar Magnets with Countersunk Holes

N42 Grade 0.75 Inch (in) Length Neodymium Magnet with Countersunk Holes

N42 to N52 Neodymium Block and Bar Magnets with Countersunk Holes

N42 Grade 0.75 Inch (in) Length Neodymium Magnet with Dual Sided Countersunk Holes

N42 to N52 Neodymium Block and Bar Magnets with Countersunk Holes

N42 Grade 1 Inch (in) Length Neodymium Bar Magnet with 2 Countersunk Holes

N42 to N52 Neodymium Block and Bar Magnets with Countersunk Holes

N48 Grade 1 Inch (in) Length Neodymium Magnet with 2 Countersunk Holes
Description N/A JBF National cube, block, and bar magnets are crafted from the highest quality rare earth neodymium. These magnets are utilized across a wide spectrum of industries for a multitude of uses. To ensure longevity and maximum protection from corrosion, these magnets come triple coated with a base and top finish layer of nickel, with a layer of copper in between. Also, the countersunk Holes these magnets feature make affixing them in place as needed no issue at all.
Brands N/A JBF National
Length N/A 0.50 in N/A 3/4 in N/A 3/4 in N/A 1 in N/A 1 in
Width N/A 0.5 in N/A 0.75 in N/A 0.75 in N/A 0.5 in N/A 0.5 in
Height N/A 0.25 in N/A 0.13 in N/A 0.25 in N/A 0.13 in N/A 0.13 in
Countersunk Outer Hole Diameter N/A 0.34 in N/A 0.34 in N/A 0.34 in N/A 0.25 in N/A 0.25 in
Countersunk Inner Hole Diameter N/A 0.17 in N/A 0.17 in N/A 0.17 in N/A 0.125 in N/A 0.125 in
Countersunk Angle N/A 90 º
Center Hole Diameter N/A
Countersunk Hole Type N/A Tapered Hole
Type N/A Block N/A Block N/A Block N/A Bar N/A Block
Pull Strength N/A 13.0 lb N/A 10 lb N/A 20 lb N/A 11 lb N/A 12 lb
Grade N/A N42 N/A N42 N/A N42 N/A N42 N/A N48
Material N/A Neodymium
Coating N/A